ブラックフライデー。 全プラグイン40%オフ、太平洋時間12月1日23:59まで。 1回のご注文で異なるプラグインを4つ以上お求めいただくと、RTM COMPAREが無料。 すべての価格を見るプラグインBlack Friday: 40% off every本
CXBのフロントフェイス。ブラックフライデーの全価格を見る
ブラックフライデー

全プラグイン40%オフ

太平洋時間12月1日23:59まで

  • 新登場:CXB $59.00 $35.40

  • 新登場:RTM COMPARE、1回のご注文で異なるプラグインを4つ以上お求めいただくと無料

ミックスとマスターを比較するRTM COMPARE:ひとつのチャートに2つのスペクトル、ソロ中の帯域にズームした表示、ラウドネスとトゥルーピーク付きでFilesリストにスタックされた2つのバージョン、レベルマッチはオン、ひとつのタイムラインに両方の波形。
RTM COMPARE · Compare and measure · Tools

何でも比較。本当にそこにあるものを測定。

RTM COMPAREは、ひとつのアプリとひとつのプラグインからなる究極の比較・測定ツールです。ミックス、マスター、バージョンとリファレンス、Spotifyなどのアプリ、ライブのDAW、Atmosとステレオ、プラグイン同士を比較できます。そして本当にそこにあるものを測定します: 差分、ラウドネスとトゥルーピーク、納品チェック、コーデックオーバー、Atmos適合性、プラグインのレイテンシー、カーブ、歪み。

On Windows, also install the plug-ins (VST3 and AAX).

€33.00 · 買い切りのライセンスをご購入いただきます。

Free with 4 or more different plug-ins in one order. We add RTM COMPARE to your RTM account within a day of your order.

サウンドラボで試す

Download the manual (PDF)

比較と測定

違いを聴く。そして測る。

COMPAREはすべてのファイルを同じ方法で測定し、どの2つでもひとつの再生ヘッドで同じラウドネスで再生するので、レベルではなく違いが聴こえます。そして違いがどこにあるかを示します: チャートで、測定値で、そしてミックス周りの作業のための29のモジュールで。

レベルマッチ

どの2つでも、同じラウドネスで。

Match levelをオンにすると、AとBのうち大きい方が、小さい方の測定ラウドネスまで下がります。小さい方のファイルは元のレベルのままで、何かを持ち上げることはありません。A、B、Sで切り替えても、ループの内外を問わず再生位置はそのままです。

  • 大きい方が下がり、上がるものはない
  • Linked timeで再生位置はひとつ
  • Lで範囲をループ
COMPAREのプレーヤー:Play、A、B、Switch、Loop、Linked timeはオン、小さい方のファイルに合わせる設定でMatch levelはオン、出力、Blind testボタン。
スペクトルズーム

判断している周波数にズームする。

スペクトルを周波数方向にもレベル方向にもズームできます。Shiftを押しながら範囲をドラッグしてZoom selectionを押すとその範囲がチャートいっぱいに広がり、Fitは画面に見えている部分にレベルを合わせ、Auto centerはラインを画面内に保ちます。帯域をソロにすると表示がそれに追従し、ソロを解除すると元の表示に戻ります。ズームが変えるのは表示だけで、音声や測定値は変わりません。

  • 20 Hz〜20 kHzの全域から1/24オクターブまで
  • Shiftドラッグして、Zoom selection
  • 表示はソロに追従し、元に戻る
2.7 kHzの1オクターブのソロ帯域を中心に955 Hz〜7.6 kHzへズームしたCOMPAREのスペクトル。上にはズームの操作部(レベル幅、周波数範囲、Fit、Auto center、Zoom selection、Markers)と「Solo zoom, release to return」の表示。
バンドソロ

ひとつのバンドでA/B。

スペクトラムを押している間、そのバンドだけが鳴ります。ドラッグでスイープ、スクロールで幅を変え、A、BまたはSで同じ瞬間に同じバンドの中でソースを切り替えます。中心をHzで、幅をオクターブで入力するか、Keep soloで固定できます。Option-クリックで後で戻りたい周波数にピンを立てます。

  • 押してソロ、ドラッグでスイープ
  • AとBに同じバンド
  • プロジェクトと一緒に保存される周波数マーカー
20 Hzから20 kHzまでミックスとマスターをひとつのチャートに描いたCOMPAREのスペクトラム:約2.7 kHzに保持されたソロバンド、199 Hzに立てたマーカー、その下のBand soloコントロール(オン、中心、オクターブ単位の幅、オンのKeep solo)。
ADMとステレオ

ADMファイルをステレオマスターの隣に。

ADM BWFとステレオファイルを同じ比較に読み込みます。SpatialビューはADMファイルに記述されたオブジェクトとベッドをステレオチャンネルの隣に描き、共有タイムラインでファイルと一緒に動きます。ステレオスピーカー、汎用のバイノーラル・ヘッドフォンプレビュー、または5.1から7.1.4までのスピーカー配置で聴き、同じ出力でAとBを切り替えます。

  • ファイル自身のメタデータからのオブジェクトとベッド
  • ステレオ、ヘッドフォン、5.1から7.1.4
  • 元のファイルは決して変更されません
AにADMファイル、Bにそのステレオマスターを置いたCOMPAREのSpatialモジュール:リスナーの周りに描かれたADMのオブジェクトとベッド、その隣の2つのステレオチャンネル、AとBのレンダー、出力設定。
ソングスタック

1曲のすべてのバージョンを、スタックに。

リストのすべてのファイルに、それぞれのラウドネスとトゥルーピークが表示されます。ファイルを別のファイルの上にドロップすると、ひとつの曲のバージョンとしてスタックされ、スタックごとにA/B、Add version、専用のClearがあります。Lock Aは、ほかの曲やバージョンをBで順に聴く間、リファレンスやデモをAに固定します。

  • すべてのファイルにLUFSとトゥルーピーク
  • ファイルを別のファイルに重ねてスタック
  • リファレンスやデモのためのLock A
COMPAREのFilesリスト:Lock A付きのリファレンスまたはデモと、ひとつの曲の2つのバージョンのスタック(Aにミックス、Bにマスター)、それぞれのラウドネスとトゥルーピーク。
自分だけのレイアウト

Move every panel where you want it.

Press Arrange and every panel gets its handles: files, spectrum, timeline, measurements, spatial, tests, streaming and the player. Drag one to a new place, resize it, float it, split a combined panel into its parts or hide it. Save the layout as a workspace, set it as your default, and every project keeps its own.

  • 移動、リサイズ、フロート、分割、非表示
  • レイアウトをワークスペースとして保存
  • プロジェクトごとに自分のレイアウト
COMPARE in Arrange mode: every panel framed with its move, float and hide handles, Split on the combined panels, and empty drop zones where a panel can go.
ブラインドテスト

まず当てる。それから見る。

Shift+Bで名前、波形、測定値、空間の手がかりを隠し、AとBをランダムにXとYへ割り当てます。同じループ、同じソロバンドのまま、X、YまたはSで比較し、選んだら公開し、新しいラウンドで引き直します。

  • 名前と測定値は非表示
  • ラウンドごとにランダムなXとY
  • 公開して、新しいラウンドへ
ブラインドラウンドのCOMPARE:正体が隠されたXとY、ソロバンドとマーカーを残したまま中立のグリッドに置き換わったスペクトラム、Hiddenと表示された測定値。

オーバーレイまたは差分

AとBをひとつのチャートに描くか、AからBを引いてどちらにエネルギーが多いかを拡大できるスケールで見ます。Analysisはファイル全体またはループを平均し、Liveは再生位置を追います。

すべての測定値を並べて

インテグレーテッドとショートタームのラウドネス、トゥルーピーク、ラウドネスレンジ、クレストファクター、さらにテンポとキーの推定値を、両方のファイルについて、ファイル全体またはループで表示します。時間に沿ったエネルギーと、ひとつのタイムライン上の両方の波形も。

自動アライン

COMPAREはAとBで一致するパッセージを見つけ、Bに再生オフセットを与えます。ファイルは変更されず、テンポも伸縮されず、一致が不明確な場合はそのままです。

カー、クラブ、フォン、ストリーミング

AとBに同じリスニングテストを適用します:オプションの車内ノイズ付きのカーバランス、クラブバランス、モノラルオプション付きの小さなスマートフォンスピーカー、またはオプションのAACまたはOpusラウンドトリップ付きのストリーミング・ラウドネスプレビュー。いずれもコンピューター上で作られるシミュレーションです。

プロジェクト

ファイル、オフセット、ループ、マーカー、レイアウトと一緒に比較を保存し、中断したところから再び開けます。ポータブルコピーはオーディオも一緒に持ち運びます。オーディオファイルは決して変更されません。

ダーク、ライト、またはシステム

同じレイアウトの2つの仕上げ、またはシステム設定に従います。Spaceで再生、AとBでソース選択、Sで切り替え、Lでループ。

COMPARE 1.1

Measure the job, not just the sound.

COMPARE 1.1 adds 29 modules for the work around the mix: null tests, EQ match, stems that must add up, deliveries that must come from the master, codec overs, mic delay, esses per minute, and tests for the plug-ins and gear you build. Each one measures and explains how to read it. None of them tells you what is good.

On Mac now. The Windows version follows.

  • 29modules
  • 5roles
  • 20workspace presets
  • 12tabs per project
COMPARE 1.1 with a mix in A and its master in B: the spectrum, the Null & Diff module under it, and the Band Punch and Sections & Lift modules on the right, each showing its main readings.
A role workspace: three modules beside the spectrum, each showing up to five readings. Focus opens one over the whole window.

Hidden until you want them

Modules stay out of the way. Add one from the Modules menu, or open a role workspace and get three at once.

Tabs that talk to each other

Up to 12 named tabs per project, three modules per tab. Every tab shares the same files and results.

A guide in every module

How to use it, what it shows, how to read it. Measurements and explanations, never a verdict.

Mastering 9 modules

  • Null & DiffLines B up with A and shows what changed, where, and by how much.
  • Family CheckWhether each delivery (clean, instrumental, MP3) comes from the hero master.
  • Delivery QCClips, overs, DC, silence, real bit depth, bandwidth, hum and clicks in one file.
  • Codec OversWhere AAC and Opus encodes of the master go over, and by how much.
  • Mastering DeltaWhat mastering changed between a mix and its master: level, tone, width and dynamics.
  • Stereo & PhaseWidth and correlation per band, and where the mono sum loses level.
  • Album SequenceThe loaded masters as an album: order, gaps and level track to track.
  • Vinyl PremasterSide length, low-end phase, sibilance and inner-groove readings for a cut.
  • Atmos ConformanceThe ADM master folded to stereo against the stereo master: level, length and timing.
The Null & Diff module: offset, polarity, the gain for the deepest null, null depth and timing, then a time and frequency map of where B is louder or quieter than A.

Mixing 5 modules

  • EQ MatchThe EQ that brings B toward A, band by band, as points you can drag. Listen to B + EQ before you touch your own EQ.
  • Stem & Alt-MixDo the stems add up to the mix, and what an alt mix leaves out.
  • Vocal BalanceHow loud the vocal sits over the music, from a mix plus its instrumental or a cappella.
  • Band PunchPunch and crest per octave, A against B, on the same hits.
  • Low-End LabLow hits, held low notes and their pitch, and the pump of the low end.
The EQ Match module: the difference between A and B as a curve, the suggested EQ as bands you can drag, and what is different written out under it.

Recording 2 modules

  • Mic AlignDelay, polarity and comb loss between two mics on one source.
  • Sibilance & PlosivesEsses and pops per minute of singing, take against take.
The Mic Align module: two mics on one source read as in time and in polarity, with the confidence and steadiness over the take, and the sum as recorded against aligned.

Producer 3 modules

  • Sections & LiftThe song's parts, lettered, and how much one part lifts over another.
  • Live TipsWhile A plays, where its balance sits against B or a profile, window by window.
  • ProfilesA bank of your own measured reference tracks, and where yours sits inside it.
The Sections & Lift module: the song's parts found and lettered on a strip, with each part's time, loudness, width and low end.

Designer 10 modules

For people who build plug-ins and gear. Mac first.

  • Frequency & PhaseLevel, phase and delay per frequency, left and right.
  • Harmonics & DistortionHarmonics added at each level, even and odd, and THD.
  • Latency CheckThe delay a plug-in reports against the delay it really has, at each rate.
  • Dynamics CurveMeasured threshold, ratio, knee, attack and release.
  • AliasingTones folded back below Nyquist, and how strong.
  • IntermodulationNew tones made when two tones pass through together.
  • Noise, Idle & TailsNoise and DC at silence, and how long it rings on.
  • Plugin A/BTwo plug-ins or two versions, on test signals or music.
  • Music ThroughA section of a real song through the plug-in, then before and after as A and B.
  • Torture TestEvery sample rate and block size: errors, silence and results that change.
The Harmonics & Distortion module measuring an Apple Audio Unit: THD and THD+N against input level, even and odd harmonics, and the spectrum at one level.
サウンドラボ

2つのファイル。揃えて、ブラインドで。

ファイルはこのブラウザ内にとどまります。アップロードされることはありません。

まだファイルがありません
まだファイルがありません
2つのファイルを読み込む
0:00 / 0:00

スペクトラム

AとB · PSD · dBFS/Hz

2つのファイルから測定した値がここに表示されます。

スペース再生 AB切り替え

Tutorial · 10:32

何でも比較。本当にそこにあるものを測定。

The full tour of the app and the plug-in: files, Spotify and your DAW, Atmos and other plug-ins, with the difference chart, loudness, delivery checks and plug-in measurements. Pick a chapter to jump straight to it.

Read the transcript

Intro

This is RTM COMPARE. It plays your versions side by side, at the same point and at the same level, and it shows you what's really different between them. It comes two ways, and you get both. There's the app, which is where you do the deep work, and there's the plug-in, which sits on your mix bus in your DAW. One licence unlocks both, on Mac and Windows, and you can try it free for fourteen days. We'll learn everything in the app first, because the plug-in works the same way.

A tour of the screen, and where sound goes

Here's the screen. Your files go on the left. In the middle are A and B, the two things you're comparing, with their frequency chart, and under it the timeline and the numbers. On the right are the spatial view, the listening tests and the streaming preview, and the transport is along the bottom. Sound comes in from files, from other apps on your Mac, or from your DAW through the plug-in, and it goes out through whatever output your Mac is using, at the level of this Output knob. Whatever you do in here, your files are never changed.

Listen fairly: Match level, A/B, blind test

So let's load a mix and its master. As soon as they're read, each file shows its loudness and its true peak, and the first one becomes A, the second becomes B. Space plays, and S switches between them at exactly the same point in the song. Now turn on Match level. COMPARE turns the louder one down to the quieter one, it never boosts anything, so now you're comparing sound, not volume. Lock A to keep your reference in place, drag on the timeline to loop the chorus, and if one file starts a little later, Auto align lines B up to A without stretching anything. And if you don't trust your ears, press Shift B. A and B become X and Y, the names and numbers disappear, you pick the one you like, and Reveal tells you which one it was.

Versions: stacks, replace and re-read

Most songs have more than two versions, so here's how to keep them tidy. Drag one file onto another and they become a stack, one song with all its versions together. Choose Compare on the stack, and the mix goes to A and the newest master to B, and the older versions wait in the history, one click away. Got a new bounce? Replace file swaps it in the same slot and measures it again, and if you bounced over the same file, just press R, or Re-read, and everything updates. Stacking never moves or deletes your files.

See the difference: chart, zoom, band solo

Now let's see it. The chart shows A as a solid line and B as a dashed line on the same scale, and Difference shows A minus B, so above zero A has more, and below zero B has more. You can zoom right into the chart: scroll to zoom into the frequencies, hold Shift and scroll to zoom the level, Auto centre keeps the curve in the middle, and Fit shows everything again. Zooming only changes the picture, never the sound. And here's the best part, hold and drag on the chart, and you only hear that area. Turn on Keep solo and press S, and you're comparing just that band, and with Zoom to solo on, the chart zooms right into it. Under the chart you've got the numbers side by side: loudness, the loudest three seconds, true peak, loudness range, crest, and a BPM and key estimate. Analysis is the average of the whole file or your loop, and Live follows the playhead as it plays.

Will it translate? Car, club, phone, streaming

Last step on the same pair: will it translate? Tests lets you hear both versions in a car with cabin noise, in a club, or on a phone with a mono speaker. They're approximations, not one particular car, but if your vocal disappears on the phone, you'll hear it here first. And Streaming preview turns both down the way a streaming service would, or runs them through AAC or Opus, all on your computer, nothing is uploaded.

Stream from Spotify or your DAW

So far we've used files, but you don't even need one. Click Stream, and you'll see every app that's playing sound on your Mac. Tick the one you want, Spotify or your DAW, and it streams into COMPARE while you keep hearing it as normal. The first time, macOS asks if COMPARE can record system audio, so allow it, and if you missed that, it's in System Settings, Privacy and Security, Screen and System Audio Recording. Now open the picker next to B, and the app is right there under Apps. Choose it, and B is now whatever that app is playing, measured live, with its curve right on the chart. And nothing is recorded, it's only read while it plays.

The plug-in in your DAW

And if you'd rather stay in your session, there's the plug-in. Put COMPARE on your mix bus, and your live mix becomes A. Load a reference as B, and it plays in time with your session, so when you jump around the timeline, the reference follows. Everything you just learned is here, Match level, the chart, band solo, EQ Match, Blend and the Car, Club and Phone tests, with the same keys: A and B, S to switch, Shift B for a blind test. The heavier tools stay in the app: streaming from other apps, the streaming encodes, the plug-in analysis and Atmos.

Make room: layout, tabs and workspaces

Everything else in COMPARE lives in modules, and COMPARE is modular, so first let's make room. Click Arrange, and you can drag any panel somewhere else, resize it or float it, then Done arranging. You can add any module from the Modules menu, just type what you want to check, like punch or phase or vinyl. But the best way in is tabs. Click the plus, pick a workspace for your job, and it opens in its own tab with the three modules that job uses most, with room to work. Your files are shared across every tab, each tab keeps its own layout, and you can have up to twelve. Save layout keeps the tab you're in, Save setup keeps all your tabs, and saving the project remembers your files, your A and B, your loop and your layout. Save portable copy puts the audio inside too, so you can send it to someone.

For producers

For producers, open the Producer workspace. Sections & Lift maps your song into its parts and shows how much the chorus lifts over the verse, so load a reference as B and you can see if your drop lifts as much as theirs, in dB. Null & Diff tells you exactly what changed between two bounces, and Low-End Lab and Band Punch show you what's going on at the bottom and how hard each octave hits.

For mixers

For mixers, the Mixing workspace. Vocal Balance measures how loud the vocal sits over the music, from the mix and its a cappella. Stem & Alt-Mix checks what each alt mix leaves out before you send anything to the label. EQ Match shows the EQ that would bring B toward A, Live Tips shows where your mix sits against a reference while it plays, and Stereo & Phase shows width per band and where you lose level in mono. And if you record, Mic Align and Sibilance & Plosives are in the Recording workspace.

For mastering engineers

For mastering, start with Mastering Delta. It shows exactly what the master changed against the mix, in level, in tone, in width and in dynamics, all in one place. At the end of the job there's Family Check. Load the approved master and every file you made from it, the sixteen bit, the MP3, the clean, the instrumental, and it checks that each one really came from that master. Delivery QC checks a file for clips, overs, DC, silence, real bit depth and clicks in one go, and Codec Overs shows where your master goes over zero dB true peak once it's encoded. And there's Vinyl Premaster and Album Sequence when you need them.

Atmos

Working in Atmos? Load the ADM file and the stereo master, and you can A/B them on headphones or on speakers, all the way up to 7.1.4, with the objects moving in this 3D view. And Atmos Conformance folds the Atmos master to stereo and checks it against your stereo master, in level, length and timing.

For plug-in and gear designers (Designer)

And the last workspace is for people who build plug-ins or gear. Designer lets you pick any Audio Unit or VST3 on your Mac and measure what it really does. Here's our PEAK2. Frequency & Phase sends a sweep through it, and it comes back flat. Latency Check shows the delay a plug-in reports against the delay it really has, at every sample rate, and here they match everywhere, which is exactly what you want to see. Harmonics & Distortion shows what it adds. Then in Dynamics, I turn the drive up, and Dynamics Curve measures the real threshold, knee, attack and release, not what the knobs say. Noise, Idle & Tails checks what it does at silence and how much CPU it uses. There's also Aliasing, Plugin A/B to compare two plug-ins or two builds, and a Torture Test for every sample rate and block size, and with a loop cable you can measure your hardware too.

Wrap-up

So that's RTM COMPARE: listen fairly, see the difference, and go as deep as your job needs. The app and the plug-in, on Mac and Windows. Try it free for fourteen days, the link's below, and go hear what's really different, and what's just louder.

RTM COMPARE
$35.40

€33.00 · 買い切りのライセンスをご購入いただきます。

Free with 4 or more different plug-ins in one order. We add RTM COMPARE to your RTM account within a day of your order.

プラグイン。

  1. CXB ブーストとカットを、一緒に動かす。 CXBを見る
  2. TXB2 音楽に呼応するトーン。 TXB2を見る
  3. RYDE ボーカルのレベルを、自動で。 RYDEを見る
  4. DMASK2 大切な音に、居場所を。 DMASK2を見る
  5. LESS-ES ボーカルの耳に刺さる響きを和らげる。 LESS-ESを見る
  6. PEAK2 レベルを上げる。キャラクターを選ぶ。 PEAK2を見る
  7. STACK2 1テイクで、より豊かなサウンド。 STACK2を見る
  8. GOAT 声に新しいキャラクターを。 GOATを見る

macOSとWindows向けのアプリとプラグイン。ひとつのライセンスで両方を使えます。

macOS 14.4以降、Apple siliconとIntel · Windows